Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across River Oaks
If you own one of River Oaks’ 1920s or 1930s homes, your chimney cap and crown are probably older than anyone living in the house. A failing cap lets rain and chimney swifts straight into the flue, and a failing crown lets water track down through the masonry into the smoke chamber. We handle chimney cap & crown work across River Oaks, from a single replacement cap on a bungalow near the River Oaks Country Club to a custom multi-flue cap on a two-story brick home off Willowick. Local expertise matters here because the houses are not standard: original handmade brick, herringbone fireboxes, and flues that were never designed for the appliances now vented into them. Call (844) 299-4971 and we’ll set up a free estimate.
Why River Oaks Homeowners Call Chimney Sweep Garden Oaks for Chimney Cap & Crown
We work River Oaks regularly, and the chimneys here teach you things a generalist never picks up. The 1920s brick is handmade and irregular, so a standard off-the-shelf cap often doesn’t seat right on the original crown. Our technicians have up to 14 years of experience and know how to read the difference between a crown that needs coating and one that needs rebuilding.
We don’t upsell. That matters more in older River Oaks homes than almost anywhere, because the margins for unnecessary liner and masonry work on a century-old chimney are tempting for some outfits. Our rule is simple: nothing gets recommended until you’ve seen the camera footage yourself. When a crown can safely wait a season, we tell you that too.
Response time to River Oaks is quick. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Our local pros are licensed and insured as their state requires, and the flat price is agreed before anything gets booked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in River Oaks
Cap Installation
A new cap is the cheapest protection you can put on a River Oaks chimney, and it’s the one most often missing. We install caps from Gelco and Famco sized to the actual flue opening, not a generic guess. On a humid Houston chimney that sits unused for months, a good cap keeps rain, leaves and animals out and lets moisture that’s already inside escape.

Cap Replacement
Original single-flue caps on 1920s River Oaks houses were often sized for one clay tile and never fit the whole stack. When a cap rusts through or blows loose, adjacent flues sit wide open. We measure every flue, not just the one the old cap covered, and replace with a properly fitted unit.

Crown Repair
Here’s where River Oaks is different. The crowns on these older mansions were often formed from the same handmade brick as the house, so crown failure shows up as spalling brick and eroded mortar joints, not the cracked cast-concrete you see in newer suburbs. We repair the crown at the root of the problem – repointing, rebuilding, or replacing – rather than skim-coating over a failing structure.

Crown Coating
A crown coating makes sense when the brick and mortar underneath are sound. We won’t apply one over soot-loaded mortar or a failing liner, because a coating then hides what’s happening below it. Applied correctly, a coating seals the crown against Houston’s humidity and slows the next round of spalling.
Multi-Flue and Custom Caps
Most 1930s River Oaks chimneys serve more than one flue, and that’s where standard caps fall short. A multi-flue cap covers every opening on one base and one lid. Where the crown is an irregular handmade shape, a custom cap is often the only one that fits flat. We build to the chimney, not to a catalog page.
Trusted Brands We Service in River Oaks
We install and work with materials from a vetted lineup, including DuraFlex liners, HeatShield ceramic resurfacing, Olympia Chimney components, and Gelco and Famco caps. These are the same products chimney professionals specify nationwide – not big-box substitutes. The free estimate includes a walkthrough of what we’re proposing and why, so you can compare apples to apples. Turnaround is fast, and every job is priced on a written estimate you approve before we book.
Common Chimney Cap & Crown Problems We See in River Oaks Homes
- Handmade-brick crowns that spall and crack. Decades of Houston humidity work into the mortar, and water tracks down into the smoke chamber where it rusts the damper. Left alone, the rust spreads and the crown keeps losing material each season.
- Undersized single-flue caps on multi-flue stacks. The original cap covered one tile, leaving the rest of the crown open to rain and chimney swifts. We see this on plenty of 1920s houses along the River Oaks lanes.
- Crown coatings over a compromised flue. A coating hides early third-degree creosote and failing liner joints when it’s applied without a camera check first. That’s why we inspect before we coat.
- Nests of chimney swifts in open flues. Swifts are protected under federal law, so they can only be removed after nesting season ends in late summer. We schedule cap installation around that window so the birds leave and the flue is safe to cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in River Oaks, TX
River Oaks pricing runs a little higher than the suburbs because the chimneys are older, larger, and often irregular in shape. A typical single-flue cap installation in River Oaks runs $250 – $450. A multi-flue cap on a 1930s chimney runs $500 – $900. Crown repair ranges from $450 – $1,200 depending on how much spalling brick and mortar has to come out. A crown coating runs $350 – $650 when the structure underneath is sound. Custom caps fabricated to fit an original handmade crown start around $700. The written estimate sets the final price, and estimates are free. Call (844) 299-4971 for an exact quote.
We Also Serve Cities Near River Oaks
Our work extends beyond River Oaks into the surrounding neighborhoods, and the chimneys share a lot of the same 1920s and 1930s character. We also serve Montrose, West University Place, The Heights, and Uptown. If you’re outside River Oaks and aren’t sure whether we cover your street, give us a call. We’ll let you know before you spend a dime.
Serving River Oaks, TX – Our Local Coverage Area
We serve River Oaks and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in River Oaks
Look at how the cap is fastened and whether the material matches the age of the chimney. Original caps on River Oaks homes from the 1920s and 1930s are usually thin metal or short masonry built into the crown itself, sometimes with hand-poured concrete. A later addition often shows modern bolts, a stainless lip, or a cap sized for only one flue. We can tell you during the inspection. Call (844) 299-4971 for a free estimate.
Yes, when the spalling is at the crown and the brick below it is still sound. The crown is where most River Oaks water intrusion starts, because the original handmade-brick crown is the first surface to fail. We cut out the failing brick and mortar, rebuild the crown slope so water sheds off, and then coat it. If the spalling runs down the chimney body, that’s a masonry repair, not a crown job, and we’ll tell you which yours is before you commit.
Because most of these houses had more than one flue, and a single cap leaves the others open. A multi-flue cap covers every tile on one lid, so rain, birds and debris can’t get into adjacent flues. It also keeps the crown drier, which slows the humidity-driven spalling that’s common in River Oaks. Call (844) 299-4971 and we’ll quote one for your actual flue count.
Not always, but it often needs a Level 2 inspection with a camera first. A Level 3 is reserved for cases where a camera can’t see the problem or the flue is concealed behind construction. On a sealed River Oaks chimney, the usual first step is a camera walkthrough of the flue liner so you can see any failing joints before we cover anything. We don’t put a cap on a chimney we haven’t inspected. Call for a free estimate to start.
Chimney swifts are protected under federal law, so we can only clear an active nest after nesting season ends in late summer. That means an open flue with swifts inside usually gets scheduled for early fall, ahead of the winter cold snaps that drive heavy fireplace use. If your flue is already covered, swifts can’t get in, so cap installation earlier is always better. Call (844) 299-4971 for timing and pricing.
Ready to Give Your River Oaks Chimney a Cap It Can Count On?
From a single replacement cap off Westheimer to a full crown rebuild on a 1920s exterior chimney, we handle the whole system – cap, crown, liner, damper – under one call. We tell you what your chimney actually needs, show you the camera evidence, and price it flat before anything is booked. If a crown can safely wait, we say so. Call (844) 299-4971 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Chimney Sweep Garden Oaks.