Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Garden Oaks Homeowners
Masonry doesn’t fail all at once. It goes a little at a time, usually where you can’t see it: a soft mortar joint behind the flashing, a hairline crack in the crown, a brick face that has started to flake after a rainy spring. By the time water shows up on the firebox floor, the damage has been working on your chimney for a while. Our technicians have up to 14 years of experience reading exactly that kind of damage, and we tell you what your chimney actually needs instead of what’s easiest to sell. We work on chimneys across Garden Oaks, from the older brick homes near the boulevard to newer builds off Ella. Call (844) 299-4971 and we’ll set up a free estimate.
What Our Chimney Repair Service Includes
Chimney repair in Garden Oaks covers the masonry shell, the flue, the crown, and the flashing that ties your chimney to the roof. We handle all of it, which means you’re not juggling a mason, a roofer, and a sweep who each blame the other for the leak.
Mortar Repointing
Repointing is replacing the mortar between bricks that has crumbled, cracked, or washed out, without replacing the bricks themselves. You need it when joints look recessed, sandy, or you can scrape mortar away with a screwdriver. We rake out the failed mortar to a proper depth and repack it with a mix matched to your chimney’s brick, so the repair moves with the masonry instead of cracking away from it.
Spalling Brick Repair
Spalling is when a brick face peels, flakes, or pops off, usually after moisture gets in and the brick can’t dry out fast enough. It’s worth fixing early, because a spalled brick keeps absorbing water and takes the bricks around it down with it over time. We replace the damaged units with brick that matches in size and color, then treat the surrounding masonry so the repair blends in.
Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry that keeps rain out while letting trapped moisture escape. You want it when brick and mortar stay dark after rain or show efflorescence, the white chalky staining that means water is moving through the masonry. We apply a vapor-permeable sealer after any masonry repair has cured, never before, so we’re not sealing moisture in.
Flashing Repair
Flashing is the metal that seals the joint where your chimney passes through the roof, and it’s the source of most chimney leaks we see. If you have staining on the ceiling near the chimney or rust streaks down the masonry, the flashing is usually where the water is getting in. We reset or replace the flashing and counter-flashing and seal the seams so the roof-to-chimney connection actually sheds water.
Chimney Rebuilding
Rebuilding is for chimneys where the damage goes deeper than the surface: missing brick, a leaning stack, or a chase that has lost structural integrity above the roofline. It’s not a job to patch and hope, because a weakened stack is a real hazard in wind. We rebuild from a sound base up, matching the original brick where we can, and we’ll tell you honestly if a rebuild is more than the chimney needs.
Tuckpointing
Tuckpointing is a finer version of repointing that gives the mortar joints a clean, finished look, often with a slightly different mortar color for contrast. It’s the right call when the joints are still structurally sound but the face of the chimney has gone rough and uneven. We grind out the old joint to a consistent depth and finish it by hand so the result looks deliberate, not patchy.
We use HeatShield ceramic resurfacing when the flue tiles are cracked but the chimney structure is otherwise sound. It’s a liner-restoration method that smooths and seals the flue from the inside, and it’s a solution most general handymen can’t perform. When a full reline is the better answer, we install DuraFlex flexible liner systems. One company for the entire chimney system, from the firebox to the cap.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with HeatShield ceramic resurfacing for flue tile repair, and we know where that system performs and where a full reline makes more sense. We also install and repair Gelco chimney caps and Famco caps, and we know how those caps weather in this part of Texas, where sun and rain do more to a cap than cold ever will.
We also work with Olympia Chimney components, and we know which connections and fittings tend to be the first to need attention on a system that’s been in service a while. Whether you have HeatShield, Gelco, Famco, Olympia Chimney, or any other make, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling or missing mortar joints – When joints look sandy or you can dig into them with a key, the masonry is losing its grip. That’s a repointing job before it becomes a rebuilding job.
- White staining or dark streaks on the brick – Efflorescence and persistent damp patches mean water is moving through the masonry. Left alone, that moisture works its way into the flue and the framing around it.
- Water in the firebox or on the ceiling near the chimney – This usually points to flashing or crown failure, not the roof itself. Finding it early saves you from repairing rot and interior finishes along with the chimney.
- A cracked or flaking chimney crown – The crown sheds water away from the stack, and once it cracks, water runs straight down into the masonry below it. A crown repair now is far less work than rebuilding the top of the chimney later.
- Loose bricks or a cap that’s shifted – Movement at the top of the stack is a structural sign, and it matters for safety as much as appearance. If you can see gaps or a tilt, it’s worth having it looked at before the next storm season.
Our Chimney Repair Process – Step by Step
- 1
We start with an inspection, not a quote. Before we price anything, we look at the whole system: the firebox, the flue, the crown, the flashing, and the masonry from the roofline up. We follow NFPA 211-aligned inspection practice so nothing obvious gets skipped. If something can safely wait, we say so.
- 2
We show you what we found. You get photos of the actual damage, not a verbal description you have to take on faith. That’s the part most homeowners never get from a general handyman, and it’s the reason you can trust the recommendation.
- 3
You get a written, itemized estimate. Each repair is listed with what it involves, so you can see why the price is what it is. Nothing gets added later without your say-so.
- 4
We do the work with professional-grade materials. That means mortar matched to your brick, sealers that let masonry breathe, and brands like HeatShield and Gelco that chimney professionals specify. Built to last, not patched to pass inspection.
- 5
We check our own work before we leave. We confirm the repair is sound, the flashing sheds water, and the flue is clear. If there’s anything to watch over the next season, we’ll tell you then, not after the fact.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Garden Oaks?
Chimney repair in Garden Oaks typically runs from a few hundred dollars for a small flashing or crown fix up to several thousand for a partial rebuild, and the written estimate is what sets the final price. Here’s roughly how the common jobs break down:
| Repair | Typical estimated range |
|---|---|
| Mortar repointing (small section) | $250-$600 |
| Tuckpointing (full chimney face) | $500-$1,200 |
| Spalling brick repair | $300-$900 |
| Chimney waterproofing | $300-$700 |
| Flashing repair | $350-$800 |
| Crown repair | $400-$900 |
| Chimney rebuilding (upper section) | $2,500-$8,000 |
What moves the number: how much of the chimney is affected, how high the work sits above the roofline, whether interior access is needed, and whether we’re matching older brick. You avoid overpaying by getting an itemized estimate and photos before anyone touches the masonry. Our estimates are free, and we’ll tell you plainly when a repair can wait a season.
Chimney Repair Near Garden Oaks – Our Service Area
We work throughout Garden Oaks and the surrounding neighborhoods, including Oak Forest, The Heights, Acres Homes, Spring Branch, and Spring Valley Village, plus River Oaks, Montrose, Uptown, and Aldine. Drive times across this part of Houston are short, and we schedule work so we’re not rushing a masonry repair. If you’re nearby and need chimney repair or a look at a leaking flashing, we’re close by.
Serving Garden Oaks, TX – Our Local Coverage Area
We serve Garden Oaks and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Garden Oaks
Chimney repair covers the structural and masonry fixes that keep your chimney safe and watertight, from repointing mortar and replacing spalled brick to flashing repair, waterproofing, crown work, and rebuilding a damaged stack. It’s different from a sweep, which cleans the flue, though the two often go together. We look at the whole system and tell you which repairs your chimney actually needs. Call (844) 299-4971 for a free estimate.
Most masonry repairs, like repointing or flashing work, take a day or less, while larger jobs like a partial rebuild can run two to five days depending on weather and how much brick needs replacing. We give you a time frame with the written estimate so you’re not guessing. Call (844) 299-4971 and we’ll walk through the schedule for your chimney.
Chimney repair in Garden Oaks typically ranges from about $250 for a small repointing job up to $8,000 for a substantial rebuild, with most common repairs landing between $300 and $1,200. The exact price depends on how much masonry is affected and how high the work sits, and the written estimate sets the final number. Call (844) 299-4971 for an exact quote; estimates are free.
Yes, we service HeatShield flue resurfacing and install and repair Gelco and Famco chimney caps. We also work with Olympia Chimney components and DuraFlex liners when a reline is the right fix. Whether your chimney has one of those systems or something else, we can assess it and tell you what it needs. Call (844) 299-4971 to book an estimate.
Same-day repair is often possible when the job is small and the schedule allows, and we’ll tell you honestly at booking whether it fits. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 299-4971 and we’ll get you on the schedule.
Yes, our chimney repair work is backed by a satisfaction guarantee, and we stand behind the materials we install. If something we repaired isn’t holding up as it should, we’ll come back and make it right. Call (844) 299-4971 with any questions about coverage.
Clear the area around the fireplace and make sure we can get to the roof access, and move anything breakable away from the hearth. If you have pets, keep them in another room while we’re working. That’s really all you need to do. Call (844) 299-4971 if you’re unsure about anything before we arrive.
Schedule Your Chimney Repair Service in Garden Oaks Today
If your chimney has cracked mortar, a leaking flashing, or brick that’s starting to spall, get it looked at by someone who works on chimneys and nothing else. You’ll get photos, a written estimate, and an honest answer about what can wait. Call (844) 299-4971 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Garden Oaks.